System information

Dialogic
®
HMP Software Release 3.0WIN Release Guide — December 2010 19
Dialogic Corporation
System Requirements
2.3.3 Configurations Tested
The reference configurations listed in Table 3 have been successfully tested with CPU
utilization of 50% or less.
Siemens HiPath IP-PBX N/A Tested
SJ Labs SJphone VOIP softphone version 1.10 Soft Client Tested N/A
Table 2. Devices Tested for Interoperability with Dialogic
®
HMP Software (Continued)
Manufacturer & Product Device Type SIP H.323
Notes:
Tested = Interoperability has been tested by Dialogic.
N/A = Not applicable.
Table 3. Resource Configurations Tested
Configuration
‡
Processor R E V C F S I M HIB
IVR (Low bit rate) Dual Intel Xeon,
3.6 GHz (w/HT)
120 120 120 — 120 — — — —
IP Media Server Intel Pentium 4,
2.0 GHz
23 11 23 — 4 23 — — —
IP Media Server Intel Pentium III,
1.26 GHz
23 11 23 — 4 23 — — —
IVR/UM/Conf/Speech
High Density Contact
Center
Dual Intel Xeon,
3.6 GHz (w/HT)
240 120 240 180 24 120 — — DNI1200TEP (2)
Gateway Intel Celeron D,
2.13 GHz
606060————— DNI601TEP
Gateway Dual Socket, Dual
Core Intel Xeon,
2.8 GHz
360—360—————DNI1200TEP (3)
Media Server Dual Socket, Dual
Core Intel Xeon,
2.8 GHz
240 120 240 32 16 240 — — —
IVR (G.711) Dual Socket, Dual
Core Intel Xeon,
2.8 GHz
500—500————— —
Conferencing Dual Intel Xeon,
3.6 GHz (w/HT)
400—100400———— —
Video Services Intel Pentium D,
3.2 GHz (w/HT)
240 — 240 — — — 240 120 —
Legend: R = RTP (basic) E = Enhanced RTP V = Voice C = CNF Conferencing F = Fax
S = Speech I = IP Call Control M = Multimedia HIB = Dialogic
®
HMP Interface Board
‡ = Not all resources are used simultaneously.