System information

14 Dialogic
®
HMP Software Release 3.0WIN Release Guide — December 2010
Dialogic Corporation
Release Overview
11. Change “Select the protocol this QoS policy applies to:” from default ''TCP'' to
''UDP''. If you want to specify a specific range of source port addresses, select
“From this source port number or range:” Specify the range of RTP and RTCP
port numbers used by the IPM devices. The default range is from 49152 to the
number of IPM devices x 2 (RTP+RTCP). Click Finish.
12. Close the Microsoft Management Console. Click Yes to save the settings.
13. Start the Dialogic
®
HMP Software.
Refer to the Dialogic
®
Global Call IP Technology Guide, Dialogic
®
Global Call API
Library Reference, and the Dialogic
®
Global Call API Programming Guide for
information about Global Call. For more information about Windows policy-based
Quality of Service (QoS), refer to the Microsoft web site.
• There is a restriction when assigning Dialogic
®
HMP Software licenses to a NIC in
systems with more than five NICs. The HMP license must be tied to one of the first
five NICs listed in the NIC priority list, otherwise the license will fail to activate. The
NIC priority list can be changed under Advanced Settings of Manage Network
Connection in the Windows Control Panel, allowing any NIC to be used for the HMP
license.