User`s guide

;; verify = level
;; level 1 - verify peer certificate if present
;; level 2 - verify peer certificate
;; level 3 - verify peer with locally installed certificate
;; default - no verify
verify = 3
;; limit connections to certain ciphers
ciphers = AES128-SHA:DES-CBC3-SHA :@STRENGTH
;; asm_hostname_or_ip_address must be replaced with the correct value for the
OS Provisioning Server
[fsrepo]
accept = 127.0.0.1:21307
connect = asm_hostname_or_ip_address:40607
4. Update the accept and connect values in the [fsrepo] section.
Value Action
accept = 21307
Update to accept = 127.0.0.1:21307
connect = asm_hostname_or_ip_
address:40607
Update to the hostname or the IP address of the OS
Provisioning Server
5. Run the commands from the Stunnel directory to register and start the Stunnel service.
cd c:\Program Files (x86)\VMware\VCM\Tools\sTunnel
stunnel –install
net start stunnel
What to do next
Verify that the communication between the OS Provisioning server and the VCMCollector is properly
configured. See "Confirm Stunnel Configuration" on page 42.
Confirm Stunnel Configuration
You must confirm that Stunnel communication between the OS Provisioning server and the VCM
Collector is configured and active before provisioning machines.
Prerequisites
n
Configure Stunnel on the OS Provisioning Server as described in "Configure Stunnel on the OS
Provisioning Server " on page 39.
n
Configure Stunnel on the VCMCollector as described in "Configure Stunnel on the VCM Collector" on
page 40.
vCenter Configuration Manager Installation and Getting Started Guide
36 VMware, Inc.