Installation guide

12. On the Mappings tab, scroll through the Application extensions list to ensure that *.svc exists. If the
*.svc extension does not exist, refer to the following procedure to troubleshoot and resolve the
problem.
Troubleshooting the WCF ISAPI Installation
In some scenarios, the metabase security settings may become corrupted. If you have followed the
previous procedure and are unable to verify the correct configuration of the “.svc” extension, it may be
necessary to reset the settings.
NOTE The following series of commands should only be used if you encountered difficulties with the
VCM installation and you are returning to this guide to resolve installation problems.
1. To open a command prompt window, select Start | Run. Type cmd and click OK.
2. The following series of commands are used to remediate WCF configuration problems:
vCenter Configuration Manager Hardware and Software Requirements Guide
28 VMware, Inc.