Specifications

Foglight for Virtualization, Standard Edition: Installation and Configuration Guide 32
Chapter 1—Installing Foglight for Virtualization, Standard Edition
Note In order to successfully connect the Foglight for Virtualization Hyper-V Collector to the SCOM
server, you must create the following group/users as the first step of an SCOM installation:
OpsMgrAdmins: Global Group, containing the following users:
• OpsMgrSDKConfig: a domain user, must be a local administrator on the server with OpsMgr
and member of the OpsMgrAdmins group.
• DWDataReader: a domain user.
• DWDataWriter: a domain user.
• OpsMgrAction: a domain user, a local administrator on the server with OpsMgr and member
of the OpsMgrAdmins group.
• VMMService: a domain user, a local administrator on the server with the Virtual Machine
Manager (VMM).
The user specified in the Connections tab should be a member of the OpsMgrAdmins group.
Upgrading the Foglight for Virtualization Hyper-V Collector
There are two ways in which you can upgrade a Foglight for Virtualization Hyper-V Collector.
Choose the method that best suits your needs.
Important It is important to note that both methods involve re-installing the VKernel management packs.
This is a key part of the procedure when upgrading the Foglight for Virtualization Hyper-V
Collector.
• Option 1 - Remove the VKernel management packs, create a new connection, and then re-
load the packs. For further details, see “Option 1” on page 32.
• Option 2 - Import the management packs manually. For further details, see “Option 2” on
page 33.
Option 1
1 Open the Systems Centre Operations Manager console and navigate to Administration >
Management Packs.
There are three management packs that you will need to remove:
• VKernel Capacity Analyzer Pack
• VKernel Capacity Analyzer PRO Overrides Pack
• VKernel Capacity Analyzer PRO Pack
2 Highlight one of the three management packs and click Delete.