Specifications

Foglight for Virtualization, Standard Edition: Installation and Configuration Guide 31
Chapter 1—Installing Foglight for Virtualization, Standard Edition
b In the Server Configuration area, type the appropriate server information and
credentials.
If you are using the Embedded PostgreSQL database, the Server address should be the
address of the Foglight for Virtualization, Standard Edition virtual machine. For the
embedded PostgreSQL database, the account and password are
postgres and postgres.
3 Click Apply.
4 Click the Connections tab.
The Connections tab specifies the connection to the Systems Center Operations Manager
(SCOM).
If the connection parameters were specified properly, a new connection appears on the
connection list. The data collection starts immediately.
Note After adding a connection, the user is asked to confirm the installation of VKernel
management packs on the SCOM.
5 Review the connection information and edit if necessary.
6 To check the connections defined in the list, click Check.
The Hyper-V Collector tries to open port 5724 (default interaction port for SCOM servers)
for each connection in the list.
If the port cannot be opened for some connections, an error message appears, displaying all
“bad” connections. Otherwise, the Connections to SCOM servers are OK message appears.
Click OK to close the dialog box.
7 Click Close.