Specifications

Foglight for Virtualization, Standard Edition: Installation and Configuration Guide 26
Chapter 1—Installing Foglight for Virtualization, Standard Edition
Activating a Purchased License
After the initial configuration, when you click any top level tab other than Dashboard, the Request
a License dialog box opens and prompts you to license the module you are trying to access.
Note Internet access is required to complete this procedure.
To activate a purchased license:
1 Click a top level tab other than Dashboard.
The Request a License dialog box opens.
2 Select Purchased License and click Next.
The Customer ID dialog box opens.
3 Type the customer ID in the box and click Next.
The License Socket Count dialog box opens.
4 Review the information provided. If necessary, adjust the value in the Total Sockets
Required for This Server box.
For example, if you have purchased 300 sockets, but the server you are installing the license
on only requires 150 sockets, type
150 in the box.
5 Click Request the License to submit the licensing request.
A message box opens while the request is processed, then the results of the license request
are displayed.
6 Click Finish.
To allocate socket licenses, see “Allocating Socket Licenses” on page 27.
Activating a Purchased License after Installing a Trial License
Alternately, if you have been using a trial license and want to add a purchased license, you can do
so from the Settings > License tab.
Note Internet access is required to complete this procedure.