5.5

2 Double-click the organization virtual datacenter name to open the organization virtual datacenter.
3 Click the Org VDC Networks tab, right-click the organization virtual datacenter network name and
select Configure Services.
4 Click the VPN tab and click Add.
5 Type a name and optional description.
6 Select a remote network from the drop-down menu.
7 Type the peer settings.
8 Review the tunnel settings and click OK.
vCloud Director configures the organization peer network endpoint.
What to do next
Manually configure the remote peer network endpoint.
Enable Static Routing for an Organization Virtual Datacenter Network
You can configure certain organization virtual datacenter networks to provide static routing services. After
you enable static routing on an organization virtual datacenter network, you can add static routes to allow
traffic between different vApp networks routed to the organization virtual datacenter network.
Prerequisites
Verify that you have a routed organization virtual datacenter network.
Procedure
1 Click the Manage & Monitor tab and click Organization VDCs in the left pane.
2 Double-click the organization virtual datacenter name to open the organization virtual datacenter.
3 Click the Org VDC Networks tab, right-click the organization virtual datacenter network name, and
select Configure Services.
4 On the Static Routing tab, select Enable static routing and click OK.
What to do next
Create static routes. See “Add Static Routes Between vApp Networks Routed to the Same Organization
Virtual Datacenter Network,” on page 91 and “Add Static Routes Between vApp Networks Routed to
Different Organization Virtual Datacenter Networks,” on page 93.
Add Static Routes Between vApp Networks Routed to the Same Organization
Virtual Datacenter Network
You can add static routes between two vApp networks that are routed to the same organization virtual
datacenter network. Static routes allow traffic between the networks.
You cannot add static routes between overlapping networks or fenced vApps. After you add a static route to
an organization virtual datacenter network, configure the network firewall rules to allow traffic on the static
route.
Static routes function only when the vApps included in the routes are running. If you perform any of the
following operations on a vApp that includes static routes, the static routes no longer function and you must
remove them manually.
n
Change the parent network of a vApp
n
Delete a vApp
Chapter 5 Managing Cloud Resources
VMware, Inc. 91