5.1

3 Click the Edge Gateways tab, right-click the edge gateway name, and select Properties.
4 Click the Configure IP Settings tab.
5 Type a new IP address for each external network to modify, and click OK.
Suballocate IP Pools on an Edge Gateway
Suballocate into multiple static IP pools the IP pools that the external networks on an edge gateway provide.
Procedure
1 Click the Manage & Monitor tab and click Organization vDCs in the left pane.
2 Double-click the organization vDC name to open the organization vDC.
3 Click the Edge Gateways tab, right-click the edge gateway name, and select Properties.
4 Click the Sub-Allocate IP Pools tab.
5 Select an external network and IP pool to suballocate.
6 (Optional) Type an IP address or range of IP addresses within the IP pool range and click Add to add a
suballocated IP pool.
7 (Optional) Select a suballocated IP pool and click Modify to modify the IP address range of the
suballocated IP pool.
8 (Optional) Select a suballocated IP pool and click Remove to remove the suballocated IP pool.
9 Click OK.
Configure Rate Limits on an Edge Gateway
Configure the inbound and outbound rate limits for each external network on the edge gateway.
Rate limits apply only to external networks backed by distributed port groups with static binding.
Procedure
1 Click the Manage & Monitor tab, and click Organization vDCs in the left pane.
2 Double-click the organization vDC name to open the organization vDC.
3 Click the Edge Gateways tab, right-click the edge gateway name, and select Properties.
4 Click the Configure Rate Limits tab.
5 Click Enable for each external network on which to enable rate limits.
6 Type the Incoming Rate Limit in gigabits per second for each enabled external network.
7 Type the Outgoing Rate Limit in gigabits per second for each enabled external network, and click OK.
Delete an Edge Gateway
You can delete an edge gateway to remove it from the organization vDC.
Prerequisites
Delete any organization vDC networks that the edge gateway backs.
Procedure
1 Click the Manage & Monitor tab and click Organization vDCs in the left pane.
2 Double-click the organization vDC name to open the organization vDC.
3 Click the Edge Gateways tab, right-click the edge gateway name, and select Delete.
vCloud Director Administrator's Guide
80 VMware, Inc.