1.5

On Org Network Shared, create a static route to vApp Network 1 and another static route to vApp Network
2.
Table 5-7. Static Routing Settings
Static Route to
Network Route Name Network Next Hop IP Address Route
vApp Network 1 tovapp1 192.168.1.0/24 192.168.0.100 Within this network
vApp Network 2 tovapp2 192.168.2.0/24 192.168.0.101 Within this network
What to do next
Create firewall rules to allow traffic on the static routes. See “Add a Firewall Rule for an Organization
Network,” on page 54.
Add Static Routes Between vApp Networks Routed to Different Organization
Networks
An organization administrator can add static routes between two vApp networks that are routed to different
organization networks. Static routes allow traffic between the networks.
You cannot add static routes between overlapping networks or fenced vApps. After you add a static route to
an organization network, configure the network firewall rules to allow traffic on the static route. For vApps
with static routes, select the Always use assigned IP addresses until this vApp or associated networks are
deleted check box.
Static
routes only function when the vApps included in the routes are running. If a vApp includes static routes
and you change the parent network of the vApp, delete the vApp, or delete a vApp network, the static routes
cannot function and you must remove them manually.
Prerequisites
Verify that vCloud Director has the following configurations:
n
vShield 5.0.
n
Two organization networks routed to the same external network.
n
Static routing is enabled on both organization networks.
n
A vApp network is routed to each organization network.
n
The vApp networks are in vApps that were started at least once.
Procedure
1 Click the Manage & Monitor tab and click Organization Networks in the left pane.
2 Right-click the organization network name and select Configure Services.
3 On the Static Routing tab, click Add.
4 Type a name, network address, and next hop IP address.
The network address is for the vApp network to which you want to add a static route. The next hop IP
address is the external IP address of the router for the organization network to which that vApp network
is routed.
5 Select To external network and click OK.
6 Click Add.
vCloud Director Administrator's Guide
62 VMware, Inc.