1.5

3 Select the type of setup and network type and click Next.
You can create an external direct organization network by using either method.
Option Network Type
Typical
Select the external network check box and select direct connection from the
drop-down menu.
Advanced
Select External organization network - direct connection.
4
Select an external network and click Next.
You can deselect the Only use networks accessible by this organization check box to view external
networks that are not currently available to the organization through its organization vDCs. When you
deselect this check box, you can select an arbitrary network and later create an organization vDC that can
access the network.
5 Type a name and optional description and click Next.
6 Review the settings for the organization network.
Click Finish to accept the settings and create the organization network, or click Back to modify the settings.
Add an External NAT-Routed Organization Network
You can add an external NAT-routed organization network that only this organization can access. An external
NAT-routed organization network provides NAT connectivity to machines outside this organization, which
provides more control of what is accessible.
Prerequisites
Verify that you have an external network and a network pool.
Procedure
1 Click the Manage & Monitor tab and click Organizations in the left pane.
2 Right-click the organization name and select Add Networks.
3 Select the type of setup and network type and click Next.
You can create an external routed organization network using either method.
Option Network Type
Typical
Select the external network check box and select Routed connection from
the drop-down menu.
Advanced
Select External organization network - NAT-routed connection.
4
Select an external network and network pool and click Next.
5 (Optional) Deselect the Only use networks accessible by this organization check box to view external
networks and network pools that are not currently available to the organization through its organization
vDCs.
When you deselect this check box, you can select an arbitrary network or network pool and later create
an organization vDC that can access it.
6 Use the default network settings or type your own settings and click Next.
7 (Optional) Type an external IP address for the network to use for NAT services, click Add, and click
Next.
This setting is only available in advanced setup. You can add more than one external IP address.
Chapter 3 Creating and Provisioning Organizations
VMware, Inc. 33