5.5

10 Type the traffic Destination.
Option Description
IP address
Type a destination IP address to apply this rule on.
Range of IP addresses
Type a range of destination IP addresses to apply this rule on.
CIDR
Type the CIDR notation of traffic to apply this rule on.
internal
Apply this rule to all internal traffic.
external
Apply this rule to all external traffic.
any
Apply this rule to traffic with any destination.
11 Select the Destination port to apply this rule on from the drop-down menu.
12 Select the Protocol to apply this rule on from the drop-down menu.
13 Select the action.
A firewall rule can allow or deny traffic that matches the rule.
14 Select the Enabled check box.
15 (Optional) Select the Log network traffic for firewall rule check box.
If you enable this option, vCloud Director sends log events to the syslog server for connections affected
by this rule. Each syslog message includes logical network and organization UUIDs.
16 Click OK and click OK again.
17 Click Apply.
Reorder Firewall Rules for a vApp Network
Firewall rules are enforced in the order in which they appear in the firewall list. You can change the order of
the rules in the list.
When you add a new firewall rule to a vApp network, it appears at the bottom of the firewall rule list. If you
want to enforce the new rule before an existing rule, reorder the rules.
Prerequisites
A routed vApp network with two or more firewall rules.
Procedure
1 Click the My Cloud tab and click vApps in the left pane.
2 Right-click a vApp and select Open.
3 On the Networking tab, select Show networking details.
4 Right-click the vApp network and select Configure Services.
5 Click the Firewall tab.
6 Drag and drop the firewall rules to establish the order in which the rules are applied.
7 Click OK.
8 Click Apply.
vCloud Director User's Guide
76 VMware, Inc.