5.5

Table 2‑7. Static Routing Settings for Org VDC Network 2
Static Route to
Network Route Name Network
Next Hop IP
Address Route
vApp Network 1 tovapp1 192.168.1.0/24 10.112.205.101 To external network
vApp Network 2 tovapp2 192.168.11.0/24 192.168.10.100 Within this network
What to do next
Create firewall rules to allow traffic on the static routes.
Reset an Organization Virtual Datacenter Network
If the network services, such as DHCP settings, firewall settings, and so on, that are associated with an
organization virtual datacenter network are not working as expected, reset the network.
No network services are available while an organization virtual datacenter network resets.
Prerequisites
n
Verify that you have an external NAT-routed organization virtual datacenter network or an internal
organization network.
n
Verify that you have organization administrator privileges.
Procedure
1 Click Administration and select the organization virtual datacenter.
2 Right-click an organization virtual datacenter network, and select Reset Network.
3 Click Yes.
View IP Use for an Organization Virtual Datacenter Network
You can view a list of the IP addresses from an organization virtual datacenter network IP pool that are
currently in use.
Prerequisites
Verify that you are an organization administrator.
Procedure
1 Click Administration and select the organization virtual datacenter.
2 Right-clicki an organization virtual datacenter network, and select IP Allocations.
Add IP Addresses to an Organization Virtual Datacenter Network IP Pool
If an organization virtual datacenter network is running out of IP addresses, you can add more addresses to
its IP pool.
You are an organization administrator.
You cannot add IP addresses to external organization virtual datacenter networks that have a direct
connection.
Procedure
1 Click Administration and select the organization virtual datacenter.
2 Right-click an organization virtual datacenter network and select Properties.
vCloud Director User's Guide
28 VMware, Inc.