5.1

5 Click the Syslog Server Settings tab.
Apply Syslog Server Settings to a vApp Network
You apply syslog server settings to a routed vApp network to enable firewall rule logging.
Syslog server settings can only be specified by a system administrator. You should apply those settings to any
vApp network that was created before the system administrator specified them. You should also apply the
syslog server settings to a vApp network any time a system administrator changes the settings.
Prerequisites
A routed vApp network.
Procedure
1 Click My Cloud.
2 In the left pane, click vApps.
3 Select a vApp, right-click, and select Open.
4 On the Networking tab, select a vApp network, right-click, and select Synchronize syslog server
settings.
5 Click Yes.
Editing vApp Properties
You can edit the properties of an existing vApp, including the vApp name and description, OVF environment
properties, leases, and sharing settings.
n
Modify a vApp Name and Description on page 82
You can change the name and description associated with a vApp to make it more meaningful.
n
Modify vApp OVF Environment Properties on page 83
If a vApp includes user-configurable OVF environment properties, you can review and modify those
properties.
n
Reset vApp Leases on page 83
You can reset the runtime and storage leases for a vApp.
n
Share a vApp on page 83
You can share your vApps with other groups or users in your organization. The access controls you set
determine the operations that can be completed on the shared vApps.
Modify a vApp Name and Description
You can change the name and description associated with a vApp to make it more meaningful.
You are at least a vApp user.
Procedure
1 Click My Cloud.
2 In the left pane, click vApps.
3 Select a vApp, right-click, and select Properties.
4 On the General tab, modify the vApp name and description and click OK.
vCloud Director User's Guide
82 VMware, Inc.