5.1

Table 3-6. Static Routing Settings for Org vDC Network 1
Static Route to
Network Route Name Network Next Hop IP Address Route
vApp Network 2 tovapp2 192.168.11.0/24 10.112.205.100 To external network
vApp Network 1 tovapp1 192.168.1.0/24 192.168.0.100 Within this network
Table 3-7. Static Routing Settings for Org vDC Network 2
Static Route to
Network Route Name Network Next Hop IP Address Route
vApp Network 1 tovapp1 192.168.1.0/24 10.112.205.101 To external network
vApp Network 2 tovapp2 192.168.11.0/24 192.168.10.100 Within this network
What to do next
Create firewall rules to allow traffic on the static routes.
Reset an Organization vDC Network
If the network services, such as DHCP settings, firewall settings, and so on, that are associated with an
organization vDC network are not working as expected, reset the network.
No network services are available while an organization vDC network resets.
Prerequisites
n
Verify that you have an external NAT-routed organization vDC network or an internal organization
network.
n
Verify that you have organization administrator privileges.
Procedure
1 Click Administration and select the organization vDC.
2 Right-click an organization vDC network, and select Reset Network.
3 Click Yes.
View IP Use for an Organization vDC Network
You can view a list of the IP addresses from an organization vDC network IP pool that are currently in use.
Prerequisites
Verify that you are an organization administrator.
Procedure
1 Click Administration and select the organization vDC.
2 Right-clicki an organization vDC network, and select IP Allocations.
Add IP Addresses to an Organization vDC Network IP Pool
If an organization vDC network is running out of IP addresses, you can add more addresses to its IP pool.
You are an organization administrator.
You cannot add IP addresses to external organization vDC networks that have a direct connection.
vCloud Director User's Guide
32 VMware, Inc.