1.5

Prerequisites
A routed organization network.
Procedure
1 Click Administration.
2 Select Cloud Resources > Networks.
3 Right-click the organization network name and select Configure Services.
4 Click the Firewall tab and click Add.
5 Type a name for the rule.
6 Select the traffic direction.
7 Type the source IP address and select the source port.
For incoming traffic, the source is the external network. For outgoing traffic, the source is the organization
network.
8 Type the destination IP and select the destination port.
For incoming traffic, the destination is the organization network. For outgoing traffic, the destination is
the external network.
9 Select the protocol.
10 Select the action.
A firewall rule can allow or deny traffic that matches the rule.
11 Select the Enabled check box.
12 (Optional) Select the Log network traffic for firewall rule check box.
If you enable this option, vCloud Director sends log events to the syslog server for connections affected
by this rule.
13 Click OK and OK.
Reorder Firewall Rules for an Organization Network
Firewall rules are enforced in the order in which they appear in the firewall list. An organization administrator
can change the order of the rules in the list.
When you add a new firewall rule to an organization network, it appears at the bottom of the firewall rule list.
To enforce the new rule before an existing rule, reorder the rules.
Prerequisites
A routed organization network with two or more firewall rules.
Procedure
1 Click Administration.
2 Select Cloud Resources > Networks.
3 Right-click the organization network name and select Configure Services.
4 Click the Firewall tab.
5 Drag the firewall rules to establish the order in which the rules are applied.
6 Click OK.
Chapter 3 Managing Cloud Resources
VMware, Inc. 25