Advanced Networking Services Guide
Table Of Contents
- vCloud Air Advanced Networking Services Guide
- Contents
- Preface
- Introducing Advanced Networking Services for vCloud Air
- Advanced Routing for vCloud Air
- Certificate and Security Group Management
- Network Security and Isolation
- Load Balancing
- Secure Access Using Virtual Private Networks
- IP Service Management: NAT and DHCP
- Index
Figure 6‑1. SSL VPN-Plus Interaction
Remote users connecting
vCloud Air
edge gateway
Admin
Corporate LAN
Windows
Server
through web access mode
Remote users connecting
through SSL client
Internet
Edge SSL VPN
external
SSL VPN-Plus supports VPN clients on the following operating systems:
n
Windows XP and above
NOTE Windows 8 is supported.
n
Mac OS X Tiger, Leopard, Snow Leopard, Lion, Mountain Lion, and Maverick
These clients can be installed manually or by using the Java installer.
n
(Required) Linux - TCL-TK
If not installed locally, the Linux client can be accessed using the CLI.
About Configuring SSL VPN-Plus
Configuring SSL VPN-Plus for vCloud Air is a multi-step process.
NOTE After configuring SSL VPN-Plus in Advanced Networking Services, vCloud Air users must
download and install a VPN client on their local systems.
Remote uses download the SSL client from vCloud Air and connect to vCloud Air over SSL VPN.
1 Configure Server Settings on page 51
You must add SSL VPN server settings to enable SSL on an edge gateway interface.
2 Add an IP Pool on page 52
The remote user is assigned a virtual IP address from the IP pool that you add.
3 Add a Private Network on page 53
Add the network that you want the remote user to be able to access.
4 Add an Authentication Server on page 54
Instead of a local user, you can add an external authentication server (AD, LDAP, RADIUS, or RSA)
which is bound to the SSL gateway. All users with accounts on the bound authentication server will be
authenticated.
vCloud Air Advanced Networking Services Guide
50 VMware, Inc.