Reference Guide

d) In the Gateways tab, click Manage in vCloud Director.
2. In vCloud Director, click Administration.
3. Choose your data center from the Virtual Datacenters list. It is displayed in a table.
4. Click the Edge Gateways tab.
5. Right-click on the gateway row, and select Edge Gateway Services from the context menu.
6. In the Configure Services:gateway window, select the NAT tab. Near the top of the NAT Rules
tab, click Add SNAT...
7. Create an SNAT rule that connects the VDC's Org-routed network to the Service Network IP
address.
a) In the Original (Internal) Source field, enter the IP range for your VDC, as discussed in
Step 1b.
b) In the Translated (External) Source field, enter the Service Network IP address, as
discussed in Step 1c.
c) Check Enable this rule, and click Next.
VMware, Inc. 14