1.0
Table Of Contents
- About this Guide
- Introducing Hybrid Cloud Manager™
- Understanding the Hybrid Cloud Manager Installation Process
- Choosing a Deployment Architecture
- Preparing Your Installation Environment
- Installing and Configuring Hybrid Cloud Manager
- Install the Hybrid Cloud Manager Appliance
- Register the Hybrid Cloud Manager with the vCenter
- Configuring the Hybrid Cloud Manager for vCenters with an External Lookup Service
- Register the Hybrid Cloud Manager with a vCloud Air Endpoint
- Installing and Configuring Hybrid Services
- Configuration Overview
- Start Appliance Installation and Configuration
- Configure the Hybrid Cloud Gateway
- Configure the Network Extension Service
- Stretching an L2 Network to vCloud Air
- Migrating a Virtual Machine to vCloud Air
- Administration
- Troubleshooting
vCloud Air® Hybrid Cloud Manager™ Installation and Administration Guide
Page 25
ii. Compute: Cluster or host where the L2 Concentrator is deployed.
iii. Datastore: Datastore where the L2 Concentrator is deployed.
Choose the L2 Network Parameters
• If you leave the option “Specify the Network Parameters for the local L2 Concentrator” unchecked, you will use
the default parameters provided by the installer.
• If you want to route directly over the internet, check “Specify the Network Parameters for the local L2
Concentrator,” and specify the connection parameters.
• If the port group you selected in the Hybrid Cloud Gateway page Network field (Step 1.a on page 20) is not part
of the distributed switch, check “Specify the Network Parameters for the local L2 Concentrator” so that you can
specify additional parameters for the local L2C.
When configuration is complete, click Next.
2. On the Ready to complete page, review the information, then click Finish.
Monitoring Virtual Appliance Deployment
While the deployment is happening, follow these steps to monitor the virtual appliance deployment from the Task
console.