1.0

Table Of Contents
vCloud Air® Hybrid Cloud Manager™ Installation and Administration Guide
Page 24
d. VM/Hostname: This field is optional.
e. Provide the IP address, default gateway and DNS server to use for the Hybrid Cloud Gateway management
interface.
f. (Optional) Under Extended Configurations, set the admin and root passwords. These passwords are
specifically for the Hybrid Cloud Gateway appliance.
g. Click Next.
Configure the Network Extension Service
Follow the steps in, “Start Appliance Installation and Configuration,” and choose the Network Extensions service.
1. On the Network Extension Service page, choose a virtual distributed switch (vDS) from the Distributed Switch drop
down menu.
Choose the Route for Stretched Networks
If you check “Route stretched networks via Hybrid Cloud Gateway,” the installer determines a reasonable
placement for the L2 Concentrator, based on the switch. The placement fields are not editable.
If you do not check “Route stretched networks via Hybrid Cloud Gateway,” you must specify the Network,
Compute, and Datastore information for the L2 Concentrator.
Note: If you don’t use the Hybrid Cloud Gateway, you do not get the benefit of WAN optimization (if
installed) or intelligent routing.
i. Network: The network where the L2 Concentrator’s management interface is deployed.