1.0
Table Of Contents
- About this Guide
- Introducing Hybrid Cloud Manager™
- Understanding the Hybrid Cloud Manager Installation Process
- Choosing a Deployment Architecture
- Preparing Your Installation Environment
- Installing and Configuring Hybrid Cloud Manager
- Install the Hybrid Cloud Manager Appliance
- Register the Hybrid Cloud Manager with the vCenter
- Configuring the Hybrid Cloud Manager for vCenters with an External Lookup Service
- Register the Hybrid Cloud Manager with a vCloud Air Endpoint
- Installing and Configuring Hybrid Services
- Configuration Overview
- Start Appliance Installation and Configuration
- Configure the Hybrid Cloud Gateway
- Configure the Network Extension Service
- Stretching an L2 Network to vCloud Air
- Migrating a Virtual Machine to vCloud Air
- Administration
- Troubleshooting
vCloud Air® Hybrid Cloud Manager™ Installation and Administration Guide
Page 23
3. Click Install service.
4. On the Choose Hybrid Services page, confirm the Organization Name and Virtual Data Center are correct. It should
be the organization you specified during the procedure to “Register the Hybrid Cloud Manager with a vCloud Air
Endpoint.”
Choose the services you want to install and click Next.
Configure the Hybrid Cloud Gateway
Follow the steps in, “Start Appliance Installation and Configuration” to open the installation Wizard and choose the
hybrid service appliance you want to install.
1. On the Hybrid Cloud Gateway page, provide the following values:
a. Network: The network where the Hybrid Cloud Gateway’s management interface is placed. This is usually a
port group on a particular switch. In use cases ❶ and ❷ it can be physical switch or a standard virtual
switch. For any configuration using L2 extension, it must be a virtual distributed switch (vDS).
b. Cluster/Host: Select the Cluster or Host where the Hybrid Cloud Gateway is deployed.
c. Datastore: Select the datastore where the Hybrid Cloud Gateway is deployed.