6.5
Table Of Contents
- vSphere Command-Line Interface Concepts and Examples
- Contents
- About This Book
- vSphere CLI Command Overviews
- Introduction
- List of Available Host Management Commands
- Targets and Protocols for vCLI Host Management Commands
- Supported Platforms for vCLI Commands
- Commands with an esxcfg Prefix
- ESXCLI Commands Available on Different ESXi Hosts
- Trust Relationship Requirement for ESXCLI Commands
- Using ESXCLI Output
- Connection Options for vCLI Host Management Commands
- Connection Options for DCLI Commands
- vCLI Host Management Commands and Lockdown Mode
- Managing Hosts
- Managing Files
- Managing Storage
- Introduction to Storage
- Examining LUNs
- Detach a Device and Remove a LUN
- Reattach a Device
- Working with Permanent Device Loss
- Managing Paths
- Managing Path Policies
- Scheduling Queues for Virtual Machine I/O
- Managing NFS/NAS Datastores
- Monitor and Manage FibreChannel SAN Storage
- Monitoring and Managing Virtual SAN Storage
- Monitoring vSphere Flash Read Cache
- Monitoring and Managing Virtual Volumes
- Migrating Virtual Machines with svmotion
- Configuring FCoE Adapters
- Scanning Storage Adapters
- Retrieving SMART Information
- Managing iSCSI Storage
- iSCSI Storage Overview
- Protecting an iSCSI SAN
- Command Syntax for esxcli iscsi and vicfg-iscsi
- iSCSI Storage Setup with ESXCLI
- iSCSI Storage Setup with vicfg-iscsi
- Listing and Setting iSCSI Options
- Listing and Setting iSCSI Parameters
- Enabling iSCSI Authentication
- Set Up Ports for iSCSI Multipathing
- Managing iSCSI Sessions
- Managing Third-Party Storage Arrays
- Managing Users
- Managing Virtual Machines
- Managing vSphere Networking
- Introduction to vSphere Networking
- Retrieving Basic Networking Information
- Troubleshoot a Networking Setup
- Setting Up vSphere Networking with vSphere Standard Switches
- Setting Up Virtual Switches and Associating a Switch with a Network Interface
- Retrieving Information About Virtual Switches
- Adding and Deleting Virtual Switches
- Checking, Adding, and Removing Port Groups
- Managing Uplinks and Port Groups
- Setting the Port Group VLAN ID
- Managing Uplink Adapters
- Adding and Modifying VMkernel Network Interfaces
- Managing VMkernel Network Interfaces with ESXCLI
- Add and Configure an IPv4 VMkernel Network Interface with ESXCLI
- Add and Configure an IPv6 VMkernel Network Interface with ESXCLI
- Managing VMkernel Network Interfaces with vicfg-vmknic
- Add and Configure an IPv4 VMkernel Network Interface with vicfg-vmknic
- Add and Configure an IPv6 VMkernel Network Interface with vicfg-vmknic
- Setting Up vSphere Networking with vSphere Distributed Switch
- Managing Standard Networking Services in the vSphere Environment
- Setting the DNS Configuration
- Manage an NTP Server
- Manage the IP Gateway
- Setting Up IPsec
- Manage the ESXi Firewall
- Monitor VXLAN
- Monitoring ESXi Hosts
- Index
Table 5‑3. Short Options for iSCSI ESXCLI Command Options (Continued)
Lower-case
Option Option
Upper-case
Option Option Number Option
g --gateway
i --ip I --inherit
k --key
l --level
m --method M --module
n --nic N --authname,
--name
o --option
p --plugin
s --isid,
subnet,
switch
S --state,
secret
v --value
vicfg-iscsi Command Syntax
vicfg-iscsi supports a comprehensive set of options.
Table 5‑4. Options for vicfg-iscsi
Option Suboptions Description
-A --
authentication
-c <level>
-m <auth_method> -b
-v <ma_username>
-x <ma_password>
[-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n
<iscsi_name>]]
<adapter_name>
--level <level>
--method <auth_method> --mutual
--mchap_username <ma_username>
--mchap_password <ma_password>
[--ip <stor_ip_addr|stor_hostname> [:<portnum>]
[--name <iscsi_name>]] <adapter_name>
Enables mutual
authentication. You must
enable authentication before
you can enable mutual
authentication.
-A --
authentication
-c <level>
-m <auth_method>
-u <auth_u_name>
-w <a_password>
[-i <stor_ip_addr|stor_hostname> [:<portnum>] [-n
<iscsi_name>]] <adapter_name>
--level <level>
--method <auth_method>
--chap_password <auth_u_name>
--chap_username <chap_password>
[--ip <stor_ip_addr|stor_hostname> [:<portnum>]
[--name <iscsi_name>]] <adapter_name>
Enables authentication using
the specied options.
-A --
authentication
-l <adapter_name>
--list <adapter_name>
Lists supported authentication
methods.
Chapter 5 Managing iSCSI Storage
VMware, Inc. 75