6.0.1

Table Of Contents
Table 74. VOMA Command Options
Command Option Description
-m | --module
The module to run:
n
vmfs. This is a default option. You can check VMFS3
and VMFS 5 datastores. If you specify this module,
minimal checks are performed for LVM as well.
n
vmfsl. Check file systems that back virtual flash
volumes.
n
lvm. Check logical volumes that back VMFS datastores.
-f | --func
Functions to be performed:
n
query. List functions supported by module.
n
check. Check for errors.
n
fix. Check and fix errors.
-d | --device
Device or disk to be inspected. Make sure to provide the
absolute path to the device partition backing the VMFS
datastore. For example, /vmfs/devices/disks/naa.
00000000000000000000000000:1.
-s | --logfile
Specify the log file to output the results.
-v | --version
Display the version of VOMA.
-h | --help
Display the help message for the VOMA command.
Troubleshooting Flash Devices
vSphere uses flash drives for such storage features as Virtual SAN, host swap cache, and Flash Read Cache.
The troubleshooting topics can help you avoid potential problems and provide solutions for issues that you
might encounter when configuring flash drives.
Local Flash Devices Are Unavailable for Use with Virtual SAN or Virtual Flash
A local flash device becomes unavailable for virtual flash resource or Virtual SAN configuration when it is
formatted with VMFS or any other file system.
Problem
When you attempt to configure either Virtual SAN or virtual flash resource, a local flash disk does not
appear on the list of disks to be used.
Cause
This problem might occur when a local flash intended for use with either feature has been already formatted
with VMFS. Neither Virtual SAN nor virtual flash can share the flash disk with VMFS or any other file
system.
Also, because virtual flash and Virtual SAN are mutually exclusive consumers of flash disks, both features
cannot share the same flash disk. If the flash disk is already claimed by one feature, for example Virtual
SAN, you are not be able to use it for another, such as virtual flash, unless you release the disk.
Solution
Use only unformatted flash disks for virtual flash resource and Virtual SAN configuration.
n
Avoid formatting the flash disks with VMFS during ESXi installation or Auto Deploy.
n
If the flash disk is already formatted with VMFS, remove the VMFS datastore. For information see the
vSphere Storage documentation.
vSphere Troubleshooting
70 VMware, Inc.