6.0.1

Procedure
1 Select the format for the virtual machine's disks.
Option Action
Same format as source
Use the same format as the source virtual machine.
Thick Provision Lazy Zeroed
Create a virtual disk in a default thick format. Space required for the
virtual disk is allocated during creation. Any data remaining on the
physical device is not erased during creation, but is zeroed out on demand
at a later time on first write from the virtual machine.
Thick Provision Eager Zeroed
Create a thick disk that supports clustering features such as Fault
Tolerance. Space required for the virtual disk is allocated at creation time.
In contrast to the thick provision lazy zeroed format, the data remaining
on the physical device is zeroed out during creation. It might take longer
to create disks in this format than to create other types of disks.
Thin Provision
Use the thin provisioned format. At first, a thin provisioned disk uses only
as much datastore space as the disk initially needs. If the thin disk needs
more space later, it can grow to the maximum capacity allocated to it.
2 (Optional) Select a storage policy from the VM Storage Policy drop-down menu.
Storage policies specify storage requirements for applications that run on the virtual machine.
3 Select a datastore location for the virtual disk.
Option Action
Store the virtual disk and virtual
machine configuration files in the
same location on a datastore.
Select Store with the virtual machine from the Location drop-down
menu.
Store the disk in a separate
datastore location.
Select Browse from the Location drop-down menu, and select a datastore
for the disk.
Store all virtual machine files in the
same datastore cluster.
a Select Browse from the Location drop-down menu and select a
datastore cluster for the disk.
b (Optional) If you do not want to use Storage DRS with this virtual
machine, select Disable Storage DRS for this virtual machine and
select a datastore within the datastore cluster.
4 Click Next.
Select Clone Options
You can optionally select to customize the guest operating system, customize the virtual machine's
hardware, and turn on the virtual machine when you complete the creation procedure. You can customize
the guest operating system to change properties, such as the computer name, and network and license
settings, which helps prevent conflicts that can result if you deploy virtual machines with identical settings.
You can add a CD device such as an ISO file to install the guest operating system or you can reconfigure the
virtual machine storage or networking, before you deploy the virtual machine.
NOTE If you opened the wizard from an object other than a virtual machine or template, the Select Clone
Options page does not appear. These options are available on a different page of the wizard.
Procedure
1 Select Customize the Operating System.
2 Select Customize this virtual machine's hardware.
3 Select Power on virtual machine after creation.
4 Click Next.
vSphere Virtual Machine Administration
30 VMware, Inc.