6.0.1

Table Of Contents
Procedure
1 Browse to the host in the vSphere Web Client navigator.
2 Click the Manage tab, and click Storage.
3 Click Storage Adapters and select the software or dependent iSCSI adapter to congure from the list.
4 Under Adapter Details, click the Network Port Binding tab and click Add.
5 Select a VMkernel adapter to bind with the iSCSI adapter.
N Make sure that the network policy for the VMkernel adapter is compliant with the binding
requirements.
You can bind the software iSCSI adapter to one or more VMkernel adapters. For a dependent hardware
iSCSI adapter, only one VMkernel adapter associated with the correct physical NIC is available.
6 Click OK.
The network connection appears on the list of VMkernel port bindings for the iSCSI adapter.
Review Port Binding Details
Review networking details of the VMkernel adapter that is bound to the iSCSI adapter.
Procedure
1 Browse to the host in the vSphere Web Client navigator.
2 Click the Manage tab, and click Storage.
3 Click Storage Adapters and select the software or dependent iSCSI adapter from the list.
4 Under Adapter Details, click the Network Port Binding tab and click View Details.
5 Review the VMkernel adapter information by switching between available tabs.
Set Up Dynamic or Static Discovery for iSCSI
With dynamic discovery, each time the initiator contacts a specied iSCSI storage system, it sends the
SendTargets request to the system. The iSCSI system responds by supplying a list of available targets to the
initiator. In addition to the dynamic discovery method, you can use static discovery and manually enter
information for the targets.
When you set up static or dynamic discovery, you can only add new iSCSI targets. You cannot change any
parameters of an existing target. To make changes, remove the existing target and add a new one.
Prerequisites
Required privilege: Host..Storage Partition 
Procedure
1 Browse to the host in the vSphere Web Client navigator.
2 Click the Manage tab, and click Storage.
3 Click Storage Adapters and select the iSCSI adapter to congure from the list.
4 Under Adapter Details, click the Targets tab.
vSphere Storage
80 VMware, Inc.