6.0.1
Table Of Contents
- vSphere Storage
- Contents
- About vSphere Storage
- Updated Information
- Introduction to Storage
- Overview of Using ESXi with a SAN
- Using ESXi with Fibre Channel SAN
- Configuring Fibre Channel Storage
- Configuring Fibre Channel over Ethernet
- Booting ESXi from Fibre Channel SAN
- Booting ESXi with Software FCoE
- Best Practices for Fibre Channel Storage
- Using ESXi with iSCSI SAN
- Configuring iSCSI Adapters and Storage
- ESXi iSCSI SAN Requirements
- ESXi iSCSI SAN Restrictions
- Setting LUN Allocations for iSCSI
- Network Configuration and Authentication
- Set Up Independent Hardware iSCSI Adapters
- About Dependent Hardware iSCSI Adapters
- Dependent Hardware iSCSI Considerations
- Configure Dependent Hardware iSCSI Adapters
- About the Software iSCSI Adapter
- Modify General Properties for iSCSI Adapters
- Setting Up iSCSI Network
- Using Jumbo Frames with iSCSI
- Configuring Discovery Addresses for iSCSI Adapters
- Configuring CHAP Parameters for iSCSI Adapters
- Configuring Advanced Parameters for iSCSI
- iSCSI Session Management
- Booting from iSCSI SAN
- Best Practices for iSCSI Storage
- Managing Storage Devices
- Storage Device Characteristics
- Understanding Storage Device Naming
- Storage Refresh and Rescan Operations
- Identifying Device Connectivity Problems
- Edit Configuration File Parameters
- Enable or Disable the Locator LED on Storage Devices
- Working with Flash Devices
- About VMware vSphere Flash Read Cache
- Working with Datastores
- Understanding VMFS Datastores
- Understanding Network File System Datastores
- Creating Datastores
- Managing Duplicate VMFS Datastores
- Upgrading VMFS Datastores
- Increasing VMFS Datastore Capacity
- Administrative Operations for Datastores
- Set Up Dynamic Disk Mirroring
- Collecting Diagnostic Information for ESXi Hosts on a Storage Device
- Checking Metadata Consistency with VOMA
- Configuring VMFS Pointer Block Cache
- Understanding Multipathing and Failover
- Raw Device Mapping
- Working with Virtual Volumes
- Virtual Machine Storage Policies
- Upgrading Legacy Storage Profiles
- Understanding Virtual Machine Storage Policies
- Working with Virtual Machine Storage Policies
- Creating and Managing VM Storage Policies
- Storage Policies and Virtual Machines
- Default Storage Policies
- Assign Storage Policies to Virtual Machines
- Change Storage Policy Assignment for Virtual Machine Files and Disks
- Monitor Storage Compliance for Virtual Machines
- Check Compliance for a VM Storage Policy
- Find Compatible Storage Resource for Noncompliant Virtual Machine
- Reapply Virtual Machine Storage Policy
- Filtering Virtual Machine I/O
- VMkernel and Storage
- Storage Hardware Acceleration
- Hardware Acceleration Benefits
- Hardware Acceleration Requirements
- Hardware Acceleration Support Status
- Hardware Acceleration for Block Storage Devices
- Hardware Acceleration on NAS Devices
- Hardware Acceleration Considerations
- Storage Thick and Thin Provisioning
- Using Storage Providers
- Using vmkfstools
- vmkfstools Command Syntax
- vmkfstools Options
- -v Suboption
- File System Options
- Virtual Disk Options
- Supported Disk Formats
- Creating a Virtual Disk
- Example for Creating a Virtual Disk
- Initializing a Virtual Disk
- Inflating a Thin Virtual Disk
- Removing Zeroed Blocks
- Converting a Zeroedthick Virtual Disk to an Eagerzeroedthick Disk
- Deleting a Virtual Disk
- Renaming a Virtual Disk
- Cloning or Converting a Virtual Disk or RDM
- Example for Cloning or Converting a Virtual Disk
- Migrate Virtual Machines Between DifferentVMware Products
- Extending a Virtual Disk
- Upgrading Virtual Disks
- Creating a Virtual Compatibility Mode Raw Device Mapping
- Example for Creating a Virtual Compatibility Mode RDM
- Creating a Physical Compatibility Mode Raw Device Mapping
- Listing Attributes of an RDM
- Displaying Virtual Disk Geometry
- Checking and Repairing Virtual Disks
- Checking Disk Chain for Consistency
- Storage Device Options
- Index
n
Overall impact on SAN environment, storage performance (while backing up), and other applications.
n
Identication of peak trac periods on the SAN (backups scheduled during those peak periods can
slow the applications and the backup process).
n
Time to schedule all backups within the data center.
n
Time it takes to back up an individual application.
n
Resource availability for archiving data; usually oine media access (tape).
Include a recovery-time objective for each application when you design your backup strategy. That is,
consider the time and resources necessary to perform a backup. For example, if a scheduled backup stores
so much data that recovery requires a considerable amount of time, examine the scheduled backup. Perform
the backup more frequently, so that less data is backed up at a time and the recovery time decreases.
If a particular application requires recovery within a certain time frame, the backup process needs to
provide a time schedule and specic data processing to meet this requirement. Fast recovery can require the
use of recovery volumes that reside on online storage to minimize or eliminate the need to access slow
oine media for missing data components.
Using Third-Party Backup Packages
You can use third-party backup solutions to protect system, application, and user data in your virtual
machines.
VMware oers the Storage APIs - Data Protection to work in conjunction with third-party products. When
using the APIs, third-party software can perform backups without loading ESXi hosts with the processing of
backup tasks.
The third-party products using the Storage APIs - Data Protection can perform the following backup tasks:
n
Perform full, dierential, and incremental image backup and restore of virtual machines.
n
Perform le-level backup of virtual machines that use supported Windows and Linux operating
systems.
n
Ensure data consistency by using Microsoft Volume Shadow Copy Services (VSS) for virtual machines
that run supported Microsoft Windows operating systems.
Because the Storage APIs - Data Protection leverage the snapshot capabilities of VMFS, backups that you can
perform do not require downtime for virtual machines. These backups are nondisruptive, can be performed
at any time, and do not need extended backup windows.
For information about the Storage APIs - Data Protection and integration with backup products, see the
VMware Web site or contact you backup vendor.
Chapter 2 Overview of Using ESXi with a SAN
VMware, Inc. 33