6.0

n
Verify that you have sufficient permissions to edit a distributed switch.
Procedure
1 Log in to the vSphere Client and select the Networking inventory view.
2 Right-click the vSphere distributed switch in the inventory pane, and select Add Host.
3 Select the hosts to add.
4 Under the selected hosts, select the physical adapters to add and click Next.
You can select physical adapters that are not being used and physical adapters that are being used.
NOTE Moving a physical adapter to a distributed switch without moving any associated virtual
adapters can cause those virtual adapters to lose network connectivity.
5 For each virtual adapter, select Destination port group and select a port group from the drop-down
menu to migrate the virtual adapter to the distributed switch or select Do not migrate.
6 (Optional) Set the maximum number of ports on a host.
a Click View Details for the host.
b Select the maximum number of ports for the host from the drop-down menu.
c Click OK.
7 Click Next.
8 (Optional) Migrate virtual machine networking to the distributed switch.
a Select Migrate virtual machine networking.
b For each virtual machine, select Destination port group and select a port group from the drop-
down menu or select Do not migrate.
9 Click Next.
10 (Optional) If you need to make any changes, click Back to the appropriate screen.
11 Review the settings for the distributed switch and click Finish.
Manage Hosts on a vSphere Distributed Switch
You can change the configuration for hosts and physical adapters on a vSphere distributed switch after they
are added to the distributed switch.
Prerequisites
n
Open a vSphere Client connection to a vCenter Server.
n
Verify that you have sufficient permissions to edit a distributed switch.
Procedure
1 Log in to the vSphere Client and select the Networking inventory view.
2 Right-click the distributed switch and select Manage Hosts.
3 Select the hosts to manage and click Next.
4 Select the physical adapters to add, deselect the physical adapters to remove, and click Next.
5 For each virtual adapter, select the Destination port group from the drop-down menu to migrate the
virtual adapter to the distributed switch or select Do not migrate.
6 Click Next.
vSphere Administration with the vSphere Client
232 VMware, Inc.