6.0.2

Procedure
1 Check whether the VIB or image prole that you want to install requires the host to be placed in
maintenance mode or to be rebooted after the installation or update.
Run one of the following commands.
Option Description
Check the VIB
esxcli --server=server_name software sources vib get -v
absolute_path_to_vib
Check the VIBs in a depot
esxcli --server=server_name software sources vib get --
depot=depot_name
Check the image profile in a depot
esxcli --server=server_name software sources profile get --
depot=depot_name
2 Review the return values.
The return values, which are read from the VIB metadata, indicate whether the host must be in
maintenance mode before installing the VIB or image prole, and whether installing the VIB or prole
requires the host to be rebooted.
N vSphere Update Manager relies on the esxupdate/esxcli scan result to determine whether
maintenance mode is required or not. When you install a VIB on a live system, if the value for Live-
Install-Allowed is set to false, the installation result will instruct Update Manager to reboot the host.
When you remove a VIB from a live system, if the value for Live-Remove-Allowed is set to false, the
removal result will instruct Update Manager to reboot the host. In either case, during the reboot,
Update Manager will automatically put the host into maintenance mode.
What to do next
If necessary, place the host in maintenance mode. See “Place a Host in Maintenance Mode,” on page 192. If a
reboot is required, and if the host belongs to a VMware HA cluster, remove the host from the cluster or
disable HA on the cluster before the installation or update.
Place a Host in Maintenance Mode
Some installation and update operations that use live install require the host to be in maintenance mode.
To determine whether an upgrade operation requires the host to be in maintenance mode, see “Determine
Whether an Update Requires the Host to Be in Maintenance Mode or to Be Rebooted,” on page 191
N If the host is a member of a Virtual SAN cluster, and any virtual machine object on the host uses the
"Number of failures to tolerate=0" seing in its storage policy, the host might experience unusual delays
when entering maintenance mode. The delay occurs because Virtual SAN has to evacuate this object from
the host for the maintenance operation to complete successfully.
When you specify a target server by using --server=server_name, the server prompts you for a user name
and password. Other connection options, such as a conguration le or session le, are supported. For a list
of connection options, see Geing Started with vSphere Command-Line Interfaces, or run esxcli --help at the
vCLI command prompt.
Prerequisites
Install vCLI or deploy the vSphere Management Assistant (vMA) virtual machine. See Geing Started with
vSphere Command-Line Interfaces. For troubleshooting, run esxcli commands in the ESXi Shell.
vSphere Upgrade
192 VMware, Inc.