6.3

QuickStart Guide
20 VMware, Inc.
6 Identify the location of the folder containing the backup file from the Primary server. Manually type the
location path in the text box. Click Next.
7 The pre-install checks run. Click Next.
If some pre-install checks are unsuccessful, click the Back button to go back through the wizard, make the
necessary changes, and run the pre-install checks again.
8 The next page displays the progress of the installation. During this process, Setup installs the necessary
files and folders onto your system and applies the configuration you specified. Setup also installs
Heartbeat Diagnostics and configures it with the default settings.
9The Report pane displays the results of the installation. Click Next.
10 The progress of the VMware vCenter Server Heartbeat Packet Filter installation is displayed. Click Next.
11 The Packet Filter is installed on the Principal (Public) NIC. Once complete, the Principal (Public) network
adapter can be reconnected. Right-click the Secondary server image name and select Edit Settings.
12 Select the Principal (Public) virtual network adapter, select the Connected and Connect at power on
check boxes, and click OK.
13 In the Channel Adapter Identification page, select the appropriate adapter and review the IP address
configuration in the lower pane. Click Next.
14 Although you previously configured the IP address of the Principal (Public) network connections, you
can make any last minute changes on the Secondary server through vCenter Server Heartbeat. Click Next.
15 The Duplicate Installation Complete page is displayed. Do not select the Start vCenter Server Heartbeat
check box. Click Finish.
16 The Configure Server wizard is launched and allows you to configure the Secondary server for use with
non-identical nodes.
17 Click the Public tab and select Non-Identical (non-updatable DNS servers).
N
OTE On Windows Server 2008 installations, you must use the UNC path.
N
OTE The pre-install checks will return the message that the Primary and Secondary servers names
match. This is expected and installation will be allowed to continue.