6.3

VMware, Inc. 39
Chapter 3 Installing vCenter Server Heartbeat on Identical Nodes
5 Identify the location of the folder containing the backup file from the Primary server. Manually type the
location path in the text box. Click Next.
6 The pre-install checks run. Click Next.
If some pre-install checks are unsuccessful, go back through the wizard, make the necessary changes, and
run the pre-install checks again.
You have the following options:
 If installing on Windows Server 2003, continue with Step 7.
 If installing on Windows Server 2008, go to Step 28.
7 The next page displays the progress of the installation. During this process, Setup installs the necessary
files and folders onto your system and applies the configuration you specified. Setup also installs
Heartbeat Diagnostics and configures it with the default settings. To learn more about Heartbeat
Diagnostics see Getting Started with Heartbeat Diagnostics.
8 The Report pane displays the results of the installation. Click Next.
9 The progress of the VMware vCenter Server Heartbeat Packet Filter installation is displayed. Click Next.
You have the following options:
 If the Secondary server is physical, such as in P2P, go to Step 10.
 If the Secondary server is virtual, such as in P2V or V2V, continue with Step a.
a The Packet Filter is installed on the Principal (Public) NIC and the Principal (Public) network adapter
can be reconnected. Right-click the Secondary server image name and select Edit Settings.
b Select the Principal (Public) virtual network adapter, select the Connected and Connect at power on
check boxes, and click OK.
10 In the Channel Adapter Identification page, select the appropriate adapter and review the IP address
configuration in the lower pane. Click Next.
You have the following options:
 If using the Install Clone installation technique, continue to Step 11.
 If using the Pre-Clone installation technique, go to Step 14.
11 Configure the Principal (Public) adapter on the Secondary server through the Public Adapter
Identification page. When you select the Principal (Public) adapter, a caution message notifies you that
the IP address on the Principal (Public) adapter does not match the IP address on the Primary server (LAN
configuration only). Click OK.
N
OTE For Windows Server 2003 installations you can alternatively click Browse and locate the folder.
On Windows Server 2008 installations, you must use the UNC path.