Specifications

Reference Guide
68 VMware, Inc.
Post Installation Configuration
Upon completion of installation, a series of tasks must be performed to ensure that vCenter Server Heartbeat
is properly configured.
Add the VMware License
After completion of installation, vCenter Server Heartbeat will run in the evaluation mode for up to 60 days.
After acquiring a license, you must add the VMware vCenter Server Heartbeat serial number using the
Configure Server wizard to change from evaluation mode to production mode. To add the license:
1Right-click the System Tray icon and select Stop VMware vCenter Server Heartbeat opting to leave
protected applications running.
2 Double-click the Configure Server icon on the desktop.
3 Select the License tab of the Configure Server wizard.
4 Select the existing serial number and click the Trash Can icon.
5Click the Add Row icon and enter the VMware vCenter Server Heartbeat serial number.
6Click Finish.
7Right-click the System Tray icon and select Start VMware vCenter Server Heartbeat.
When Deployed in a WAN Environment
When deployed in a WAN environment with VMware Orchestrator and the Primary and Secondary servers
in different subnets, you must configure an Exclusion File Filter following the steps below:
1 Launch vCenter Server Heartbeat Console.
2Click Advanced to enable Advanced mode view.
3Click Data and click the Configuration tab.
4Click Add Exclusion Filter... and type the following path:
$INSTALL_PATH_TO_ORCHESTRATOR/app-server/bin/boot.properties
5Click OK.
6 Perform a switchover so that the Secondary server becomes active.
7 Launch the vCenter Orchestrator Web Configuration wizard and select Network. In the IP address field
select the Principal (Public) IP address of the Secondary server. Click Apply changes.
8 Launch the vCenter Orchestrator Web Configuration wizard and type the Principal (Public) IP address
of the Secondary server (Network > IP address).
9 Launch the vCenter Orchestrator Web Configuration wizard, select Startup Options, and click Restart
service.
10 From vCenter Server Heartbeat Console, select Application and then Services. Verify that VMware
vCenter Orchestrator Server service is included in the protected services. If not, manually run the
Protected Service Discovery task from VMware vCenter Heartbeat Console > Application > Tasks >
VMware VirtualCenter - Protected Service Discovery)
vCenter Server 2.5
The post installation configuration tasks are determined by the type of network environment.