5.0.3

12 In vCenter Operations Server Port, enter the same port set on the vCenter Operations Manager Server.
13 In Host, enter the IP address of the message queue.
This is typically the same as the vCenter Operations Manager Server host.
14 In Port, leave the default entry (61616) unless MQ is using a different port number.
15 Click Finish to complete the installation. The Install Complete page appears. Click Done.
16 If the host has two IP addresses, you need to define which one the collector should use:
a Open the file vcenter-ops\user\conf\collector\wrapper.conf.
b Add the following line to the file: wrapper.java.additional.9=-Djava.rmi.server.hostname=IP
Address/Name where IP address/Name is the IP address or host name to use for the collector.
c Save your change and close the file.
d After changing wrapper.conf, restart the collector service.
e If the host uses Windows, from the Windows Start menu, select Control Panel > Administrative
Tools > Services. Restart the CollectorService service.
f If the host uses Linux, enter these commands: cd vcenter-ops/collector/bin/CollectorService.sh
restart
Installation of the vCenter Operations Manager collector is complete.
Installing a vCenter Operations Manager Adapter
This section describes how to install and configure the vCenter Operations Manager Enterprise server.
When you install the vCenter Operations Manager Enterprise server, three adapters are deployed by default:
n
The vCenter Operations Manager Enterprise adapter. This adapter monitors vCenter Operations
Manager Enterprise and allows you to manage resource tags. See
n
The HTTP Post adapter. This is a generic adapter used to push data to vCenter Operations Manager via
HTTP.
n
The Container adapter. vCenter Operations Manager uses this adapter to create container resources.
All other adapter files are supplied separately. Contact your VMware representative for the installation files
for additional adapters. After you have the adapter installation files, follow the installation procedure. See the
documentation supplied with the adapter for possible additional instructions.
Install an Adapter
Follow this procedure to install an adapter if you have a vCenter Operations Manager standalone installation.
You need to install an adapter only on the vCenter Operations Manager Enterprise server, not on any remote
vCenter Operations Manager collectors you have installed. The adapter is "pushed" to all remote collectors
when you click the Describe button in step 6, below.
Prerequisites
n
Obtain the file for the adapter from VMware technical support.
n
Read the documentation that is included with the adapter file. It might contain additional installation
instructions.
Procedure
1 Open and extract the adapter files in a temporary folder.
vCenter Operations Manager Installation Guide
VMware, Inc. 21