5.6

Table Of Contents
Procedure
1. Click Patching.
2. Select UNIX/Linux Platform > Assessment Results > All Bulletins to display the patch status of all of
the machines that were assessed.
3. To display the assessment results for a single bulletin, select By Specific Bulletin and select a bulletin
in the center pane.
4. Review the patch status for each machine.
Icon Status Description
Patched The patch is applied to the machine.
Patch-
Machine
Mismatch
The patch OS version or hardware architecture does not match the machine.
Patch Not
Needed
The machine is up-to-date or the intended software product is not installed on
the machine.
Not
Patched
The patch is not applied to the machine.
Error
Occurred
An unexpected condition occurred during the assessment of the machine.
You can determine additional information about the root cause of the
exception by running the Debug Event Viewer at C:\Program Files
(x86)\VMware\VCM\Tools\ecmDebugEventViewer.exe.
Signature
Not
Found
The .pls patch file does not exist on the machine and the patch status cannot
be determined.
Incorrect
MD5
The MD5 Hash generated from the patch signature (.pls) file, which
contains the content and signature, does not match the expected value on the
UNIX or Linux Agent. Be aware that MD5 is NOT validated against the
vendor MD5 hash data.
Patch
Status
Unknown
The patch status of the machine cannot be determined.
If machine data has not been collected, the assessment results might not appear and the machine will not
be available for deployment. A patch-machine mismatch status results. You can display or hide the patch-
machine mismatch status. Click Administration and select Settings > General Settings > Patching >
UNIX > Settings > Bulletin and Update.
Acquire the UNIX Patches
After you review the assessment results and determine which patches to deploy, use FTP, HTTP, or
another available method to acquire the UNIX patches from the appropriate vendor.
Patching Managed Machines
VMware, Inc.
167