Installation guide

Event Name
(Default)
Report Source Event Event
Handler
Settings
Name
(Default)
Recovery
Action
Event
State
In addition to the above events, the HW Predictive event (see Subsection 1.6.8) is provided.
▪ The HW Predictive event is disabled in Standard Policy (VM Server Hyper-V).
▪ The HW Predictive event is enabled in Standard Policy (VM Server Hyper-V Predictive). (Recovery events are
disabled.)
*1 Failure and recovery events of connectivity to virtual machine servers are monitored through
Microsoft Failover Cluster. An alternative way to monitor virtual machine servers is provided
by NEC ESMPRO Manager. The operation form of the alternative way is that replaces
recovery action with "Machine Access Impossible" and "Machine Access Recovery" which
are detected by NEC ESMPRO Manager.
*2 Disabled in Standard Policy (VM Server Hyper-V) and Standard Policy (VM Server Hyper-V
Predictive).
Enabled in Standard Policy (VM Server Hyper-V Power save)
*3 Disabled in Standard Policy (VM Server Hyper-V) .
Enabled in Standard Policy (VM Server Hyper-V Predictive)
1.6.7. Settings of a System Policy (Manager)
The following table shows the settings of a System Policy (Manager).
Event Name
(Default)
Report Source Event Event
Handler
Settings
Name
(Default)
Recovery
Action
Event
State
CSV Scarce
Free Space
HyperVProvider CSV[Scarce] Notification Notification/
E-mail,
Event Log
Enable
CSV Abundant
Free Space
HyperVProvider CSV[Abundant] Notification Notification/
E-mail,
Event Log
Disable
CSV
Paused-Critical
HyperVProvider CSV[Critical] Notification Notification/
E-mail,
Event Log
Enable
CSV
Paused-Critical
Recovery
HyperVProvider CSV[NonCritical] Notification Notification/
E-mail,
Event Log
Disable
Datastore
Overallocation
on disk to red
VMwareProvider Alarm Datastore Overallocation
on disk on DATASTORE
changed from green to red
Alarm Datastore Overallocation
on disk on DATASTORE
changed from yellow to red
Alarm Datastore Overallocation
on disk on DATASTORE
changed from gray to red
Notification Notification/
E-mail,
Event Log
Enable