Installation guide

1.6.6. Settings of a Standard Policy (VM Server Hyper-V), a
Standard Policy (VM Server Hyper-V Predictive), And a
Standard Policy (VM Server Hyper-V Power Save)
The following table shows the settings of a Standard Policy (VM Server Hyper-V), a
Standard Policy (VM Server Hyper-V Predictive), and a Standard Policy (VM Server
Hyper-V Power Save).
Event Name
(Default)
Report Source Event Event
Handler
Settings
Name
(Default)
Recovery
Action
Event
State
Cluster Node
Down *1
HyperVProvider Node[Down] Set
Faulted
Status
Notification/
E-mail,
Event Log
Enable
Machine
status / Set
faulted
status
Cluster Node
Recovery *1
HyperVProvider Node[Up] Set Ready
Status
Notification/
E-mail,
Event Log
Enable
Machine
status / Set
ready
status
Scaleout
Recommendation
OptimizedPlacement Scaleout Recommendation Notification Notification/
E-mail,
Event Log
Enable
Resource Pool
Consumption :
Critical Asserted
OptimizedPlacement Resource-Pool Critical
Asserted
Notification Notification/
E-mail,
Event Log
Enable
Resource Pool
Consumption :
Warning
Asserted
OptimizedPlacement Resource-Pool Warning
Asserted
Notification Notification/
E-mail,
Event Log
Enable
over load
(SysmonPerf)
SystemMonitorPerf 11000006 load
balance
Action for
VMS/ Load
balance
VMServer
Enable
low load
(SysmonPerf)
SystemMonitorPerf 11000007 power
save
Action for
VMS/
Power save
Vmserver *
*2
VMS connection
state is green
VMwareProvider Alarm Host connection state on
VMS changed from gray to
green
Set Ready
Status
Notification/
E-mail,
Event Log
Disable