Installation guide

Appendix A Network Ports and Protocols
Event Name
(Default)
Report Source Event Event Handler
Settings
Name
(Default)
Recovery
Action
Event
State
Machine status /
Set faulted
status
Action for
machine/
Diagnose and
Power OFF
Action for VMS /
Move all VMs
on the VM
server.
(Failover)
Target Up AliveMonitor The machine access
recovered.
Set Ready
Status
Notification/
E-mail, Event
Log
Disable
Machine status /
Set ready status
Alarm
Datastore on
VMs can not
be available
StandaloneEsxProvider Alarm Datastore on
VMS can not be
available
Move all VMs
on the VM
server
Notification/
E-mail, Event
Log
Enable
Machine status /
Set faulted
status
Action for
machine/
Diagnose and
Power OFF
Action for VMS /
Move all VMs
on the VM
server.
(Failover)
Resource Pool
Consumption :
Critical
Asserted
OptimizedPlacement Resource-Pool
Critical Asserted
Notification E-mail, Event
Log
Enable
Resource Pool
Consumption :
Warning
Asserted
OptimizedPlacement Resource-Pool
Warning Asserted
Notification Notification/
E-mail, Event
Log
Enable
* In addition to the above events, the HW Predictive event (see Subsection 1.6.8 ) is set to
"enabled". (However, an event that Recovery Action is No Action is set to "disabled".)
* Suppression events of the Policy Property setting window cannot be set on the above events.