Installation guide

Appendix A Network Ports and Protocols
Event Name
(Default)
Report Source Event *1
Event Handler
Settings Name
(Default)
Recovery
Action
Event
State
*1 A suppressing function is configured to event monitoring. (For the details of the suppressing
function, see Subsection 1.1.6, "Failure Recovery With a Policy" in SigmaSystemCenter
Configuration Guide.)
The corresponding events and suppressing events are as follows:
▪ The suppressing event of the event High CPU Load is High CPU Load Recovery and Machine
Off.
▪ The suppressing event of the event High CPU Load Recovery is High CPU Load and Machine
Off.
▪ The suppressing event of the event Machine Down is Machine Up
▪ The suppressing event of the event Machine Up is Machine Down
▪ The suppressing event of the event Shortage of Memory is Shortage of Memory recovery and
Machine Off.
▪ The suppressing event of the event Shortage of Memory recovery is Shortage of Memory and
Machine Off.
In addition, the time to monitor these suppressing events is set to 180 seconds.
*2 Suppression events of the Policy Property setting window cannot be set on the above events.
*3
For a Xen environment, enable the events whose names are Target Down and Target Up and
report source is AliveMonitor because events from the virtual infrastructure do not occur. For
details, see Subsection 2.12.11, "Alive Monitoring Virtual Machines" in SigmaSystemCenter
Overview Reference Guide.