Installation guide

Appendix A Network Ports and Protocols
1.6.3. Settings of a Standard Policy (Virtual Machine)
The following table shows the settings of a Standard Policy (Virtual Machine).
Event Name
(Default)
Report Source Event *1
Event Handler
Settings Name
(Default)
Recovery
Action
Event
State
High CPU
Load
VMwareProvider Alarm Virtual Machine
CPU Usage on VM
changed from yellow to
red
Alarm Virtual Machine
CPU Usage on VM
changed from green to
red
Alarm Virtual Machine
CPU Usage on VM
changed from gray to red
Set Faulted Status Notification/
E-mail, Event
Log
Enable
Machine status /
Set faulted
status
High CPU
Load
Recovery
VMwareProvider Alarm Virtual Machine
CPU Usage on VM
changed from gray to
green
Alarm Virtual Machine
CPU Usage on VM
changed from yellow to
green
Alarm Virtual Machine
CPU Usage on VM
changed from red to
green
Set Ready Status Notification/
E-mail, Event
Log
Enable
Machine status /
Set ready status
Machine
Down
VMwareProvider Alarm Virtual Machine
Heartbeat on VM
changed from gray to red
Alarm Virtual Machine
Heartbeat on VM
changed from green to
red
Set Faulted Status Notification/
E-mail, Event
Log
Enable
Machine status /
Set faulted
status
Machine Off VMwareProvider VM on VMS in DC is
powered off
Set Faulted Status Notification/
E-mail, Event
Log
Enable
Machine status /
Set faulted
status
Machine Up VMwareProvider Alarm Virtual Machine
Heartbeat on VM
changed from gray to
green
Alarm Virtual Machine
Heartbeat on VM
changed from red to
green
VM on VMS in DC is
powered on
Set Ready Status Notification/
E-mail, Event
Log
Enable
Machine status /
Set ready status