Installation guide

Classification Event Category Event ID Message Description
[PET]
0x801B6F01
Cable/Interconnect:
Configuration Error
cleared
Recovered from the
Configuration error.
OS Others [PET]
0x00206F00
OS Stop/Shutdown:
Critical stop during OS
load / Initialization
Stopped during OS
initialization.
[PET]
0x00206F01
OS Stop/Shutdown:
Run-time Critical Stop
Stopped while OS is running.
Slot/Connector Others [PET]
0x00216F00
Slot/Connector: Fault
Status asserted
The slot became abnormal.
[PET]
0x80216F00
Slot/Connector: Fault
Status negated
Recovered from slot failure.
[PET]
0x00216F02
Slot/Connector:
Slot/Connector Device
Installed
The slot is implemented.
[PET]
0x80216F02
Slot/Connector:
Slot/Connector Device
Removed
The slot was removed.
[PET]
0x00216F05
Slot/Connector: Slot
Power is OFF
The slot is powered OFF.
[PET]
0x80216F05
Slot/Connector: Slot
Power is ON
The slot is powered ON.
[PET]
0x00216F07
Slot/Connector:
Interlock asserted
Interlock occurred.
[PET]
0x80216F07
Slot/Connector:
Interlock negated
Recovered from Interlock.
[PET]
0x00216F08
Slot/Connector: Slot is
Disabled
The slot is disabled.
[PET]
0x80216F08
Slot/Connector: Slot is
Enabled
The slot is enabled.
ACPI Power
State
Others [PET]
0x00226F00
System ACPI Power
State: S0/G0 Working
System ACPI Power State:
S0/G0 Working
System ACPI Power State:
S5/G2 Soft off
[PET]
0x00226F05
System ACPI Power
State: S5/G2 Soft off
System ACPI Power State:
S5/G2 Soft off
[PET]
0x00226F07
System ACPI Power
State: G3 Mechanical
Off
System ACPI Power State: G3
Mechanical Off
[PET]
0x00226F09
System ACPI Power
State: G1 Sleeping
System ACPI Power State: G1
Sleeping
Watchdog
Timer
Others [PET]
0x00236F00
Watchdog Timer:
Timer expired, status
only (no action, no
interrupt)
Watchdog Timer was not
updated within a time frame.
(No Action is configured.)
[PET]
0x80236F00
Watchdog Timer:
Recover from Timer
expired only
Recovered from time-out.
[PET]
0x00236F01
Watchdog Timer:
Hard Reset
Executed Hard reset by
Watchdog Timer.