Installation guide

Appendix D Types of Action Sequence
NO. Action Sequence Names
Corresponding machine
configuration change
Functions Physical
Machine
Virtual
Machine
13 MoveFromPoolToGroup
Activating Machine / Allocate
Machine (Physical Machine)
Activating Machine / Scale Out
(Physical Machine)
Activating Machine / Allocate
Machine (Virtual Machine)
Activating Machine / Scale Out
(Virtual Machine)
Activates a machine in the pool of the group
to run in the group. Distributes software,
customizes the machine (*2), and registers
to NEC ESMPRO Manager monitoring target
(*1). If automatic registration to DPM is
configured, the machine is registered to
DPM (*3).
A A
14 MoveFromPoolToManaged Deletes a machine standing by from the pool
of the group and makes the machine stand
by in the shared pool.
A A
15 MoveMachine
Move Virtual Machine (Virtual
Machine)
Moves a virtual machine to the other virtual
machine server.
N A
16 MoveMasterMachineToGroup
Activating Machine / Register
Master Machine (Physical Machine)
Activating Machine / Register
Master Machine (Virtual Machine)
Activates a machine standing by in the
shared pool and group pool as a master
machine. Distribution software is not
distributed.
In addition, register to NEC ESMPRO
Manager monitoring target (*1). If automatic
registration to DPM is configured, the
machine is registered to DPM (*3).
A A
17 RebootMachine
Power Operation to Machine /
Restart
Reboots a machine. A A
18 ShutdownMachine
Power Operation to Machine /
Shutdown
Shuts down a running machine. A A
19 StartupMachine
Power Operation to Machine / Start
Starts a stopped machine. A A
20 SuspendMachine
Power Operation to Machine /
Suspend
Suspends an active machine. A A
21 TakeOverMachine
Replace Machine (Physical
Machine)
Replaces a machine running in the group
with a pool machine. The new machine
succeeds the information used by the old
machine.
The replaced machine is always made to
stand by in a group pool.)
A N
22 PowerOnMachine
Power Operation to machine /
Power ON
Powers on a stopped machine. A *4 N
23 PowerOffMachine
Power Operation to machine /
Power OFF
Powers off a running machine. A *4 N
24 ResetMachine
Power Operation to machine / Reset
Resets a running machine at hardware level. A *4 N