Installation guide

Appendix A Network Ports and Protocols
5. The system starts writing the monitoring target to a file. The following dialog box is
displayed during writing.
6. When the writing process finishes, the dialog box disappears.
Writing the monitoring target is now complete.
The first line is a header and from the second line, the written file is created in the CSV
format. See the event which "Manager" field is YES.
Note: The events that SigmaSystemCenter can detect through NEC ESMPRO
Manager are only default events monitored by NEC ESMPRO Agent. If you changed
the monitoring target, you may not be able to check the event properly.
1.2.3. Events SystemProvisioning Can Detect
The following table shows the error events that SystemProvisioning can detect.
The following failure events can be checked by selecting "AliveMonitor" in the Report
Source list in the Corresponding Event Handler Settings window of Policy Setting.
Event Category Event ID Event Name Description
Machine
inaccessible error
[PeriodicalAliveMonitor]
TargetDown
No response from
the machine.
SystemProvisioning
could not receive a Ping
Reply or could not
connect with a specified
port.
If the target is virtual
machine server, it is not
functioning as a virtual
machine server.
 To set over 250 units of machines as the Port monitoring target, change both the
values of Maximum number of parallel processings and Maximum time of one time
monitoring according to the formula below: