Installation guide

 Logs that the AlertManager unit outputs
The following files are the examples that you installed NEC ESMPRO Manager
first in the default installation folder in the C drive.
Note: If NEC ESMPRO Agent is installed first, the default installation folder is
C:\ESM\AlertMan.
(If NEC ESMPRO Manager is installed first, the default installation folder is
C:\ProgramFiles\ESMPRO\AlertMan.)
Folder
C:\ProgramFiles\ESMPRO\AlertMan\Work\
Files
AMVSCKR.log
Contents
Internal logs of TCO/IP alert receiving process
Use
Failure analysis
Maximum Capacity
1000 Kbytes
Action of If a Size Reaches the
Maximum Capacity
Renamed to a .bak file and .log is newly created.
Until What Generation the Files
Are Managed
Second generation (.log and .bak)
If Logs Are Increasing in
Operation
Yes: If AlertManager receives TCP/IP alert, logs
increases.
If Capacity Can Be Limited
No
If
There Is No Problem If You
Delete Files Periodically / If You
Delete Them
, If You Need to
Create Files With the Same
Names
No / No: No need for an empty file.
If You Can Refer to Files
(If So, If You Can
Check Them
Directly)
Yes (Text Editor)
However, the architecture is withheld as the logs are the
internal logs.
Folder
C:\ProgramFiles\ESMPRO\AlertMan\Work\
Files
NVCRTCPY.LOG
Contents
A log of settings of received information
An old file is deleted and a new file is created every time
alert table is reflected.
Use
Failure analysis
Maximum Capacity
1000 Kbytes
Action of If a Size Reaches the
Maximum Capacity
A size does not increase.