Installation guide

Action of If a Size Reaches
the Maximum Capacity
Outputs a maximum capacity of 5 Mbyte log in one file at
one auto discovery process.
If the output exceeds the 5 Mbyte, create a new file by
adding "YY" of the file name part to output the log.
If the number of log files exceeds 10, the oldest log file is
overwritten.
Until What Generation the
Files Are Managed
Five generation
If Logs Are Increasing in
Operation
Increases each time an auto discovery process is
executed.
If Capacity Can Be Limited
The log file is not output if the following setting is
configured from the Windows GUI:
Click Start, click NEC ESMPRO Manager and click NEC
ESMPRO Manager to open the Operation Window.
From the Operation Window menu, select [Tools] -
[Autodiscover] - [Foreground] - [TCP/IP Hosts] to
open AutoDiscover(TCP/IP Hosts) window. Then, click
Details to open Details of AutoDiscover window.
If Output Datails Log check box is cleared, the log file is
not output any more.
If There Is No Problem If
You Delete Files
Periodically / If You Delete
The
m, If You Need to
Create Files With the Same
Names
No problem / Unnecessary
If You Can Refer to Files
(If So, If You Can Check
Them Directly)
Yes (Text Editor)
However, the architecture is withheld as the logs are the
internal logs.
• Status monitoring log
Folder
tmp\ESMDSVAP directory under the directory that is
indicated in the registry:
[HKEY_LOCAL_MACHINE\SOFTWARE\NEC\NVBASE]
WorkDir
Files
ESMDSVAPXXXXXXXXXXXXXX.log
ESMDSVAPXXXXXXXXXXXXXX.log.gz
("XXXXXXXXXXXXXX" is the date when the file was
created.)
Contents
Internal logs of SNMP Monitoring process / Ping
Monitoring process
Use
Failure analysis
Maximum Capacity
50 MB
Action of If a Size Reaches
the Maximum Capacity
Creates a new log file by updating the
"XXXXXXXXXXXXXX" part. A log file which reaches 50
MB is compressed to be log.gz (the size is about 1/20)
regulary.
Until What Generation the
Files Are Managed
21 generation