Installation guide

Event
ID
Description Type Meanings Solution
3314 Canceled the action Notify the group
registration information on a machine
to DPM.
Information Canceled the action to
notify DPM the registered
information of the
machine.
Nothing
3315 Aborted the action Notify the group
registration information on a machine
to DPM.
Warning Aborted the action to
notify DPM the registered
information of the
machine.
Check the cause in
the
SystemProvisioning
log, remove the
cause, and execute
the process again.
3316 Started the action Notify machine
move to DPM.
Information Started the action to
notify DPM to move
machine.
Nothing
3317 Completed the action Notify machine
move to DPM.
Information Completed the action to
notify DPM to move
machine.
Nothing
3318 Canceled the action Notify machine
move to DPM.
Information Canceled the action to
notify DPM to move
machine.
Nothing
3319 Aborted the action Notify machine
move to DPM.
Warning Aborted the action to
notify DPM to move
machine.
Check the cause in
the
SystemProvisioning
log, remove the
cause, and execute
the process again.
7000 User ("User Name") changed the
maintenance status of machine
("Machine Name") to [On].
Information Maintenance ON of the
machine is success.
Nothing
7001 User ("User Name") changed the
maintenance status of machine
("Machine Name") to [Off]
Information Maintenance OFF of the
machine is success.
Nothing
7002 User ("User Name") reset the failure
status of machine ("Machine Name").
Information Reset the failure status of
the machine is success.
Nothing
7003 User ("User Name") reset the error
status of machine ("Machine Name").
Information Reset the execution
result of the job of the
machine is success.
Nothing
*1 In SigmaSystemCenter 3.0, event ID:502 has not been recognized by report registration of ID=502 to
ESMPRO. In order to make ESMPRO recognize the event ID:502, start NEC ESMPRO Agent in the
control panel of the NEC ESMPRO Agent installed machine, and click Report Setting (R) in the General
tab to start Alert Manager. Then, set green icon ID=502 to be a monitored target from PVM application.
*2 If it is detected via NEC ESMPRO Manager and the target machine is a virtual machine, it is registered
as ID=52x.
*3 For information level messages, SystemProvisioning sends a message which does not influence on the
result of the target process. E.g) An action which moves all virtual machines is executed but any virtual
machine to be moved does not exist.
For warning level messages, SystemProvisioning sends a message which seriously influence on the
result of the target process. E.g.) A load balancing action is executed but the high load is not reduced.
 About output messages whose event IDs are 51X, 52X, 53X, and 54X
Additional information is added to output messages whose event IDs are 51X, 52X,
53X, and 54X as follows: