Installation guide

Appendix A Network Ports and Protocols
1.7.7. Machine Status / Set Ready Status by Total Recover
Diagnosis
Diagnoses a target machine comprehensively based on the all statuses relevant to the
target machine (status as a virtual machine server, sensor status, and machine status
in detail). If this action judges the target machine is Normal, this action set Normal for
the hardware status and ends normally.
If this action judges the target machine is not normal, this action does not change the
hardware status and ends abnormally. If the following action's execution condition is
"Success", the action is not executed.
If the target machine is not a virtual machine server, diagnoses as a virtual machine
server are not executed. If the target machine is not managed by Out-of-Band
Management, the sensor diagnosis is not executed. In this case, this action judges the
status based on the results of available diagnoses.
Reference: For details of Total recover diagnosis, see Subsection 1.5.4, "Total
Recover Diagnosis."
1.7.8. Action for Machine / Startup Machine
Starts a target machine.
1.7.9. Action for Machine / Reboot Machine
Restarts a target machine.
1.7.10. Action for Machine / Shutdown Machine
Shuts down a target machine.
However, this action is not executed if there is only one machine that is running in not
faulted status, but powered ON status, left in a target group.
1.7.11. Action for Machine / Turn on LED
Requests a target machine to turn on the LED indicator.
This action can be executed in parallel with other operations on the same machine.