Technical data

VSPEX Configuration Guidelines
VMware Horizon View 5.3 and VMware vSphere for up to 2,000 Virtual
Desktops Enabled by Brocade Network Fabrics, EMC VNX, and EMC Next-
Generation Backup
135
BRCD6740-RB21# configure terminal
BRCD6740-RB21(config)# interface TenGigabitEthernet 21/0/24
BRCD6740-RB21(conf-if-te-21/0/24)# description VNX-SPA-fxg-1-1
BRCD6740-RB21(conf-if-te-21/0/24)# channel-group 33 mode active
type standard
BRCD6740-RB21(conf-if-te-21/0/24)# lacp timeout long
BRCD6740-RB21(conf-if-te-21/0/24)# no shutdown
3. Repeat above steps 1-2 on Logical Chassis’ Principal Node Rbridge
21 to configure Port-Channel 33 on Rbridge 22’s interfaces 22/0/23
and 22/0/24((enabled for storage VLAN 20)going to SPB on the VNX.
4. Validate vLAG Port-channel Interface on BRCD6740-RB21 and
BRCD6740-RB22 to VNX.
BRCD6740-RB21# show interface Port-channel 33
Port-channel 33 is up, line protocol is up
Hardware is AGGREGATE, address is 0005.338c.adee
Current address is 0005.338c.adee
Description: VNX-vLAG-33
Interface index (ifindex) is 672088673
Minimum number of links to bring Port-channel up is 1
MTU 9216 bytes
LineSpeed Actual : 10000 Mbit
Allowed Member Speed : 10000 Mbit