User`s guide

4. To add a new filter rule, click the Attribute column drop-down arrow and select the attribute. The
drop-down list displays the attributes used to filter the machines. Some of these attributes are
predefined values. For example, the attribute labeled “Different” indicates differences between the
Nmap information and the database information. Possible values are Yes/No.
NOTE When defining filters, text entries are not case sensitive. Wildcards are supported by using an
asterisk (*). The wildcard is part of the "contains" operator, and is entered in the Value field
5. To add an Operator to the filter rule, click the Operator drop-down arrow and select the operator.
Possible operators are:
Operator Value of Attribute
= Must be equal to the value defined in the Value Column.
!= Must be not equal to the value defined in the Value Column.
< Must be less than the value defined in the Value Column.
> Must be greater than the value defined in the Value Column.
contains Contains a value defined in the Value Column. Wildcards are supported by
using an asterisk (*). The wildcard is part of the "contains" operator, and is
entered in the Value field.
6. In the Value field, enter a value for the filter. Some attributes have pre-defined values. To view those
values, click the Possible Values drop-down.
7. To set a machine as a workstation, select the machine, scroll to the ClassID column, click in the field,
and then enter 2.
Welcome to the Discovered Machines Import Tool
VMware, Inc. 15