Specifications

EMC CIS Series 1 Pod Installation and Configuration Guide
1/26/2015 Copyright © Network Development Group, Inc. www.netdevgroup.com Page 22 of 23
a. Source Snapshot should be set to the GOLDEN_MASTER snapshot you
created previously.
b. Under Clone Type, click the dropdown menu and verify that Full is
selected.
c. Under Clone Role, click the dropdown menu and select Master.
d. Under Runtime Host, select the 2nd host system (which should be
different than the system you are cloning from).
10. When you are done changing settings, Click Clone Pod. This may take up to 30
minutes as full copies are being made. You may navigate away from the cloning
progress screen, and then later return to the pod to check progress.
The NETLAB+ software does not automatically create the snapshots on the
virtual machines. It is necessary to create the snapshots manually as you did in a
previous section.
11. When the cloning process is complete, you should create a GOLDEN_SNAPSHOT
on each virtual machine in the second master pod.
5.4 Creating User Pods on the Second Host
To create user pods on the second host, repeat the steps to create User pods on the first
host (section 5.2), substituting the second master pod (created in the previous section)
as the cloning source.