User guide

34 | Working with the AppAssure 5 Core
Configuring Deduplication Cache Settings
Complete the steps in this procedure to configure deduplication cache settings.
To configure deduplication cache settings
1. Navigate to the AppAssure 5 Core Console and click the Configuration tab, and
then Settings.
2. In the Deduplication Cache Configuration area, click Change.
The Deduplication Cache Configuration dialog box displays.
3. In the Primary Cache Location text box, enter an updated value to change the
primary cache location.
4. In the Secondary Cache Location text box, enter an updated value to change the
secondary cache location.
5. In the Metadata Cache Location text box, enter an updated value to change the
metadata cache location.
6. Click OK.
NOTE: You must restart the Core service for the changes to take effect.
Modifying AppAssure 5 Engine Settings
Complete the steps in this procedure to modify AppAssure 5 engine settings.
To modify AppAssure 5 engine settings
1. Navigate to the AppAssure 5 Core Console and click the Configuration tab, and
then Settings.
2. In the Replay Engine Configuration area, click Change.
The Replay Engine Configuration dialog box displays.
3. Enter the configuration information as described in the following table.
Text Box Description
IP Address Specify the IP address by choosing one of the following:
Click Automatically Determined to use the preferred IP
address from your TCP/IP.
Or, click Use a specific address to manually enter an IP
address.
Preferable Port Enter a port number or accept the default setting. The
default port is 8007.
The port is used to specify the communication channel for
the AppAssure engine.
Port in use Represents the port that is in use for the Replay Engine
configuration.