1.2

VMware, Inc. 29
Chapter 4 AppSpeed Administration
Delete Probes
Ifyoudonotwanttomonitorthetrafficonaspecifichost,youcanremovetheprobesfromthathost.
Delete probes from hosts
1IntheProbesManagementwindow,selectthecheckboxesforoneormoreprobesononeormultiple
hosts,andclickDeleteProbe.
2ClickOKtoconfirm.
Theprobeis
removedfromtheselectedhostsonly.
Managing SSL Keys
ForAppSpeedtomonitortrafficonHTTPSsitesthatincorporateSSLprotection,youmustconfiguretheSSL
keysforeachendpoint,theIPaddressandportpair,whereAppSpeeddetectsSSLtraffic.AppSpeedsupports
Apache,MicrosoftIIS6.0,andMicrosoftIIS7.0SSLkeys.
AppSpeedsupportsconfiguringandmonitoringSSLkeys
forHTTPSsitesonly.
View SSL key information
1ClicktheAdministrationtab,andintheManagementToolspane,clickSSLManagement.
2ViewthesecuresiteendpointsforwhichAppSpeedcannotmonitortrafficwithoutakey.
 ThePendingSSLEndpointstableliststheendpointsforwhichvalidSSLkeysarerequired,including
theirIPaddressesandports.AppSpeedidentifiestheSSLendpointsforwhichkeysdonotexist.
 TheMonitoredSSLEndpointstableliststheendpointsforwhichvalidkeysexistinAppSpeed,
includingtherespectiveservername,whereavailable,andIPaddressandports.AppSpeedmonitors
trafficontheseendpoints.
Add an SSL Key
YoucanassignakeytoapendingendpointtoenableAppSpeedtoactivelymonitoritstraffic.
Add an SSL key
1IntheSSLManagementwindow,selectthecheckboxesfortheendpointsintheSSLPendingEndpoints
tableandclickAdd/UpdateSSLkey.
2Browsetoandopenthekeyfile.
Thekeyisassigned
totheselectedendpoints.TheendpointmovesfromtheSSLPendingEndpointstableto
theMonitoredEndpointstable.
Update an SSL Key
YoucanupdatetheSSLkeyassignedtoanendpoint,forexample,toreplaceanolderkeywithanewone.
Update an SSL key
1IntheSSLManagementwindow,selectthecheckboxesfortheendpointsintheMonitoredEndpoints
tableandclickAdd/UpdateSSLkey.
2Browsetoandopenthenewkeyfile.
Thenewkeyreplacesthekeypreviouslyassignedtotheselectedendpoints.